拒绝访问 | www.ggdoc.com | 百度云加速
请打开cookies.
此网站 (www.ggdoc.com) 的管理员禁止了您的访问。原因是您的访问包含了非浏览器特征(43d2a9a83c16437c-ua98).
重新安装浏览器，或使用别的浏览器prtg 能监控H3C路由器温度吗_百度知道
prtg 能监控H3C路由器温度吗
prtg 能监控H3C路由器温度吗
能说一下怎么操作吗
答题抽奖
首次认真答题后
即可获得3次抽奖机会，100%中奖。
可以的，开启温度的探测器就行了。
为您推荐：
您可能关注的内容
换一换
回答问题，赢新手礼包
个人、企业类
违法有害信息,请在下方选择后提交
色情、暴力
我们会通过消息、邮箱等方式尽快将举报结果通知您。Intuitive to Use.Easy to manage.
200.000 administrators have chosen PRTG to monitor their network. Find out how you can
reduce cost, increase QoS and ease planning, as well.
What is this?
This knowledgebase contains questions and answers about
and network monitoring in general. You are invited to get involved by asking and
answering questions!
PRTG Network Monitor + sFlow in H3C switches with VLAN
Your Vote:
I?m a new customer, using the Trial version in a Win7 box.
The thing is, I?m trying to get sFlow data that a H3C S5500 switch is providing, but when I set the sFlow sensor in PRTG it show "no data since startup".
Using Wireshark, I can see the sFlow packets arriving in my NIC, so why the PRTG is not getting this data?
I?m using a different software for comparison purposes and this software can read the sFlow data coming from H3C swtich.
My topology is:
H3C switch is in VLAN 7
PRTG box is in VLAN 4.
No firewall between.
I can read SNMP data in PRTG.
Any thoughts that could help me?
Thanks a lot.
Accepted Answer
Your Vote:
please use our
to verify that the incoming sflow-packets are compatible to PRTG.
best regards.
Your Vote:
Hey Torsten,
Thanks for your fast reply.
I?ve ran the Sflow-Tester for 20 minutes, here are the results:
(1)Sflow version: 126 OK
---------- 0 FAILED
(2) IP Source: 126 OK
---------- 0 FAILED
(3) IP Version: 126 OK
---------- 0 FAILED
Samples: 616
(4) Sample Format: 0 OK
---------- 616 FAILED
(5) Source ID / Sequence: 0 OK
---------- 0 FAILED
(6) Data Format: 0 OK
---------- 0 FAILED
(7) Ethernet Type: 0 OK
---------- 0 FAILED
(8) Protocol Type: 0 OK
---------- 0 FAILED
The box UDP Packet received got the IP address of the switch
The box Decoded Flows stay empty.
Well, with the information provided in the SFlow-Test, item 4 - PRTG supports sampples in 'Flow sample format'. 'Extended flow' and 'Counter' formats are not supported, can I assume this is why my PRTG is not getting the data???
Last change
Your Vote:
Yes, you are correct.
Your Vote:
Thanks for your reply Torsten!
Is there any future plans for PRTG accept the "extended flow" format ? Or any way to configure the actual version to interpret it ?
Your Vote:
@marcelomaciel: We do not have appropiate hardware in our lab unfortunately. If you are willing to help us test it with a private test build, please contact
to enter your reply.
Disclaimer: The information in the Paessler Knowledge Base comes without warranty of any kind. Use at your own risk. Before applying any instructions please exercise proper system administrator housekeeping. You must make sure that a proper backup of all your data is available.}